Skip to content
Bundle & Save — add tile & grout or upholstery to any 3+ room carpet package and save up to 15%. See combo pricing →
Large travertine tile floor with clean grout lines in a Roseville, California home
Tile & Grout Cleaning

Professional Tile & Grout Cleaning in Roseville

Rotary deep-cleaning that pulls soil out of the grout lines instead of pushing it around, with optional sealing to keep it cleaner for longer.

Why Grout Goes Dark

The tile is easy. The grout is the problem.

Glazed tile has a sealed surface, which is why a mop takes care of it. Grout does not. Cement-based grout is porous — it is full of microscopic voids that behave like a sponge — and it sits slightly below the tile surface, so it is exactly where soil, grease and mop water end up collecting.

Mopping actually makes that worse over time. A mop lifts soil off the tile faces and then pushes the dirty water into the low points, where it wicks into the grout and dries there. Repeat that weekly for a few years and you get the classic result: clean-looking tile with grout lines that have gone two or three shades darker, and a floor that never quite looks right no matter how often you clean it.

In kitchens there is cooking grease in the mix, which binds soil to the grout more stubbornly. In bathrooms it is soap film and body oils, and in some cases mineral deposits from hard water. Entryways and hallways get straight abrasive grit tracked in from outside. Each of those needs a slightly different approach.

  • Kitchens — cooking grease and food soil bound into the grout
  • Bathrooms — soap film, body oils and hard-water mineral deposits
  • Entryways — abrasive grit and soil tracked in from outside
  • High-traffic hallways — concentrated wear and soil in the walked lanes
Tile floor with clean grout lines after professional cleaning
Step By Step

Our Tile & Grout Process

The soil comes out of the floor and into our machine, not into a bucket.

01

Inspection

We look at the tile type, the grout condition and the areas of concern, and check for cracked grout, loose tile or existing damage. If we think some discolouration is permanent, you hear it at this point.

02

Dry sweep and vacuum

Loose grit and debris come off the floor first, including the edges and corners where it packs in.

03

Pre-treatment with dwell time

A cleaning agent suited to the soil type is applied to the tile and grout and left to work — this is what breaks the bond between grease and soil and the porous grout.

04

Agitation

Grout lines and edges are agitated with brushes so the pre-treatment gets down into the low points where a mop never reaches.

05

Rotary extraction

A rotary extraction tool works across the floor with heated water while vacuuming continuously, so the released soil is recovered into our equipment rather than spread across the tile.

06

Detail work and walkthrough

Corners, edges and stubborn lines get individual attention, then we walk the floor with you dry so you can see the actual result and we can point out anything that did not fully release.

Realistic Expectations

Cleaning removes soil. It does not re-colour grout.

This is the honest part, and it is the thing most tile cleaning advertising skips. A professional clean removes the soil, grease and film that have accumulated in the grout, and on most floors that produces a dramatic difference — grout lines several shades lighter, and tile with the haze gone off it.

But there is a difference between grout that is dirty and grout that has changed. We cannot promise that permanently stained or damaged grout will return to its original colour, because in some cases nothing short of colour-sealing or regrouting will do that. Situations where the result will be improvement rather than restoration include:

  • Grout that has been dyed by spills, rust or strongly pigmented liquids
  • Grout that has eroded or worn down, exposing rougher material underneath
  • Cracked, crumbling or missing grout, which needs repair rather than cleaning
  • Efflorescence and mineral deposits left behind by long-term moisture
  • Etching or damage from harsh acidic cleaners used previously
  • Natural stone that has lost its finish, which is a polishing issue not a soil issue

We will tell you which of these we think we are looking at during the inspection, and we would rather set the expectation low and beat it than the other way round.

Classic Carpet Cleaning technician working on a hard-surface floor
After The Clean

Sealing and keeping it that way

Optional grout sealing

We offer a protective grout sealant at $0.50 per sq ft, applied after cleaning while the grout is clean and dry. It occupies the pores in the grout so spills sit on top for longer instead of soaking straight in, which buys you time to wipe them up.

What sealing does and does not do

Sealer makes grout easier to keep clean and slows down re-soiling. It is not permanent, it does not make grout stain-proof, and it does not change the colour of grout that is already discoloured. It wears with traffic and needs reapplying periodically.

Maintenance between visits

Sweep or vacuum regularly so grit is not ground into the grout, and change mop water often — dirty mop water is the single biggest contributor to dark grout lines. Avoid harsh acidic cleaners, which can etch both grout and natural stone.

Most households do well having tile and grout professionally cleaned every 12 to 18 months. Busy kitchens, entryways and homes with pets or children usually benefit from the shorter end of that range.

Transparent Pricing

What tile & grout cleaning costs

$109 up to 125 sq ft

Covers a typical bathroom or a small entry. Beyond 125 sq ft, additional area is $0.75 per sq ft.

Sealant at $0.50 / sq ft

Optional protective grout sealant, applied after cleaning. Priced by the area sealed.

Save up to 15% bundled

Add tile and grout to a 3+ room carpet cleaning in the same visit and the tile work is discounted by up to 15%.

See full pricing Bundle & save options
Tile & Grout Questions

Frequently Asked Questions

Glazed tile has a sealed surface, which is why a mop handles it. Cement-based grout is porous and sits slightly below the tile face, so soil, grease and mop water collect there and wick in. Mopping actually accelerates it — it lifts soil off the tile and pushes the dirty water straight into the grout lines.

Cleaning removes the accumulated soil, grease and film, and on most floors that’s a dramatic improvement — often several shades lighter. But we can’t promise that permanently stained or damaged grout will return to its original colour. Grout that has been dyed by spills, has eroded, is cracked, or carries mineral deposits may improve without being restored. That would need colour-sealing or regrouting, which is a different job.

It’s optional, and we offer it at $0.50 per sq ft applied after cleaning while the grout is clean and dry. It occupies the pores so spills sit on the surface longer instead of soaking straight in, which buys you time to wipe them up. It isn’t permanent, it doesn’t make grout stain-proof, and it won’t change the colour of grout that’s already discoloured.

Most households do well every 12 to 18 months. Busy kitchens, entryways and homes with pets or children usually benefit from the shorter end of that. Sweeping or vacuuming regularly so grit isn’t ground in, and changing mop water often, genuinely stretches the interval.

We tell you at the inspection if we think some of it won’t respond. Dye stains, erosion, etching from harsh acidic cleaners and efflorescence from long-term moisture aren’t soil, so cleaning won’t remove them. In those cases colour-sealing or regrouting is the route, and that’s outside a cleaning visit — we’d rather say so than take your money for a result we can’t deliver.

Kitchens, bathrooms, entryways, hallways, laundry rooms and any high-traffic tiled area. Each collects a different kind of soil — grease in kitchens, soap film and minerals in bathrooms, abrasive grit at entries — so we match the pre-treatment to what’s actually on your floor.

$109 covers up to 125 sq ft — about a typical bathroom or small entry — then $0.75 per additional sq ft. Optional sealant is $0.50 per sq ft. Adding tile and grout to a 3+ room carpet cleaning in the same visit saves up to 15%. Full details on the pricing page.

Book tile & grout cleaning

Rough square footage is all we need to quote it. Add it to a carpet cleaning in the same visit and it costs less.